Forum | Marketplace | Knowledge Base | | H1 site | H2 site | H3 site
Click Here To Visit DC Auto
Click Here To Visit DC Auto
Click Here To Visit Tustin GMC/Hummer
Click Here To Visit Tustin GMC/Hummer
Click here for a listing of all HUMMER Network sponsors

Hummer Knowledge Base

The Hummer Knowledge Base

Fixing a Leaking Windshield:

Order a windshield gasket (any OEM supplier), and get a tube of 3M windshield adhesive from any auto parts store. Remove the screws around the windshield & cut out the old gasket. Remove the windshield. Clean up the glass (or replace it). Put a small bead of the 3M caulk inside the gasket where the glass slips inside the rubber. Now put the windshield gasket around the glass (while the glass is on the bench). Put a generous bead of the caulk around where the gasket will set in the windshield frame. Set the windshield & gasket assembly in the frame & push it tight against the glass so it sets. Install the retainer screws & you're waterproof!

GeneseeMtn


Back to main page

The Hummer Knowledge Base is a collection of informative posts from the Hummer Network forums and mailing lists, contributed material and links to outside web sites.
The Hummer Network is not responsible for the accuracy of the information contained herein or on outside web sites, nor for any situation arising from the use thereof.
2006-2011 by The Hummer Network. No material from the Hummer Knowledge Base may be reprinted or republished in any form without permission.