Turbo & Pyro Gauge Installation

Click Here To Visit Phoenix Hummer Repair

Click here for a listing of all HUMMER Network sponsors

The Hummer Knowledge Base

Turbo Boost & Pyro Gauge Installation
Any turbo shop can show you where to fit a boost gauge. The fitting is fitted between the turbo and the inlet manifold. In other words, a hole is drilled into the boosted air manifold that runs to the inlet manifold. If you see reason th fit a boost gauge, then also fit a pyro gauge so you know the exhaust temperature of your engine. The pyro hole is drilled into the exhaust manifold "dump" pipe after the turbo but before the exhaust system. Engines can be tuned on the boost gauge and pyro because these two measures tell you exactly what is going on with your fuel, air, exhaust mixtures. US based turbo fitters will confirm this as fact.
Ralph

Back to main page

The Hummer Knowledge Base is a collection of informative posts from the Hummer Network forums and mailing lists, contributed material and links to outside web sites.
The Hummer Network is not responsible for the accuracy of the information contained herein or on outside web sites, nor for any situation arising from the use thereof.
© 2006-2011 by The Hummer Network. No material from the Hummer Knowledge Base may be reprinted or republished in any form without permission.