EESS Part Numbers

Click Here To Visit Phoenix Hummer Repair

Click Here To Visit Kascar/Real4WD

Click here for a listing of all HUMMER Network sponsors

The Hummer Knowledge Base

EESS Part Numbers:

HMMWV New EESS NIINs

A. 6110-01-463-9260 - 2 piece design manufactured by KDS.
This configuration contains a black control box with yellow label and a temperature sensor with a yellow band.
The temp sensor gets installed in the water crossover pipe.

B. 6110-01-491-2142 - 1 piece design manufactured by KDS.
This configuration contains a black control box with a bright green label.
There is no longer a separate temperature sensor required with this configuration.
It will not make a difference whether the glow plug controller (2920-01-175-7214) or the temp sensor (2920-01-469-6903) is installed in the water cross over pipe.
The pin to this lead is dead.

C. 6110-01-491-2152 - 1 piece design manufactured by Signal and Systems, Inc. (SSI).
This configuration contains a black control box and there is no separate controller or temp sensor.
It will not make a difference whether the glow plug controller (2920-01-175-7214) or the temp sensor (2920-01-469-6903) is installed in the water cross over pipe.
The pin to this lead is dead.

Back to main page

The Hummer Knowledge Base is a collection of informative posts from the Hummer Network forums and mailing lists, contributed material and links to outside web sites.
The Hummer Network is not responsible for the accuracy of the information contained herein or on outside web sites, nor for any situation arising from the use thereof.
© 2006-2011 by The Hummer Network. No material from the Hummer Knowledge Base may be reprinted or republished in any form without permission.